Master Lock XR20 Manual de servicio descargar pdf (Pagina 92)

The *RCL command forces an ABORt command before resetting any parameters. ABOR cancels

any trigger actions presently in progress and sets INIT:CONT to OFF.

At power turn-on, recall is commanded at the memory location prior to turn-off state.

Command Syntax: *RCL <NR1>

Parameters: 0 - 99

Example: *RCL 1

Query Syntax: None

Related Commands; *RST, *SAV

4.5.9 Reset

This command resets the power supply to factory default states as defined below.

OUTP[:STAT] OFF

CURR[:LEV][:IMM] 0

CURR[:LEV]:TRIG 0

VOLT[:LEV][:IMM] 0

VOLT[:LEV]:TRIG 0

PER 0

INIT:CONT OFF

VOLT:PROT[:LEV] 110% of MAX

CURR:PROT[:LEV] 110% of MAX

*RST also forces an ABORt command.

Command Syntax: *RST <>

Query Syntax: None

Related Commands: None

4.6 Error Messages

System error messages are obtained with the SYST:ERR? query. The error number is the value

placed in the error queue. SYST:ERR? returns the error number and error message combined in a

string. When system errors occur, the Standard Event Status Register (ESR), records the error

groups as defined in Table 4.9. Table 4.10 lists system errors that are associated with SCPI

syntax errors and with interface problems.

Table 4.9 STANDARD EVENT STATUS REGISTER ERROR BITS

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 128 129

Sin comentarios

Master Lock XR20 Manual de servicio Pagina 92