Master Lock XR20 Manual de servicio descargar pdf (Pagina 74)

Examples: CALIBRATE:SCALE:CURRENT 375.0

CAL:SCAL:CURR 375.0

Query Syntax: CALibrate:SCALe:CURRent? <>

Returned Parameters: <NR3>

Related Commands: None

4.3.9.6 CAL:SCAL:INP

This command sets the full scale external programming inputs for voltage, current, over voltage

trip, and over current trip. The scaling factor for the programming inputs must match the scaling

factor set with hardware on the control board.

Command Syntax: CALibrate:SCALe:INPut <NRf>

Examples: CALIBRATE:SCALE:INPUT 10.0

CAL:SCAL:INP 10.0

Query Syntax: CALibrate:SCALe:INPut? <>

Returned Parameters: <NR3>

Related Commands: None

4.3.9.7 CAL:DEF

This command sets the calibration potentiometers to the factory defaults.

Command Syntax: CALibrate:DEFaults <>

Examples: CALibrate:DEFaults

CAL:DEF

Query Syntax: None

Related Commands: None

4.3.9.8 CAL:STOP

This command terminates the calibration subsystem.

Command Syntax: CALibrate:STOP <>

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 128 129

Sin comentarios

Master Lock XR20 Manual de servicio Pagina 74