Master Lock XR20 Manual de servicio descargar pdf (Pagina 122)

displayed as shown in figure B.1. This figure provides the basic information about the

configuration and allows the user to enable or disable the LXI Identification. Click Enable

Identify or Disable Identify to change the state of the LXI Identification. When LXI

Identification is enabled, the LAN LED on the back of the power supply unit will blink.

This can help the user to quickly locate the power supply and distinguish it from similar

devices.

To change the Ethernet interface's network settings, click the Configure tab in the upper

right. The browser will prompt for a username and password if you have not authenticated

the device already. To authenticate, enter admin for the username and leave the password

field blank. The instrument configuration screen, figure B.2, will appear. This page

enables the user to change the Hostname (which corresponds to the NetBIOS name), the

description, password, and TCP/IP configuration. After changes to the configuration are

made, click the Save Config button. The configuration will be saved, the Ethernet interface

will reboot and instructions, shown in figure B.3, will be displayed for reconnecting to the

interface.

Web control of the power supply requires Adobe Flash Player which is available for

download from http://get.adobe.com/flashplayer/. To control the power supply, click the

Control tab in the upper right. The browser may prompt for a username and password if

you have not authenticated the device already. To authenticate, enter admin for the

username and leave the password field blank. The power supply’s control panel, figure

B.4, will be displayed. The screen displays the same status information as the front panel

of the power supply and allows the user to control and read voltage, current, over voltage

trip, over current trip, mode of operation, and diagnostics. Like the front panel, a

diagnostic condition can be cleared using the clear button. Only one user can control the

power supply at a time with the Remote Interface Software or the web interface.

110

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 128 129

Sin comentarios

Master Lock XR20 Manual de servicio Pagina 122